25mm modular frame with cloud analytics for automated motor control and LV distribution.
Single platform accommodates power distribution, PFC, motor control, dual supply, VFDs, and soft starters; eliminates need for multiple specialized cabinets and reduces system footprint by 25%.
Embedded IoT sensors and big data analytics enable real-time monitoring, predictive maintenance, and remote diagnostics; seamless integration with DCS/SCADA systems via Modbus/IEC 61850 for proactive asset management.
Fully shielded vertical busway prevents accidental contact and arc-flash propagation; independent pressure relief ducts per compartment limit fault energy and enhance personnel protection beyond IP2X requirements.
±0.1mm tolerance via industrial robots ensures ≥99.5% dimensional accuracy and ≥99% part standardization; German electrostatic water-based paint achieves ≤5μm uniformity and 0.3% defect rate for zero-maintenance appearance.
316L stainless steel base with nano-ceramic coating passes 3,000h salt spray and 200 thermal cycle tests; validated for C5-M/CX environments including coastal, chemical, and extreme temperature zones.
Laser scanning confirms ±0.1mm assembly tolerance on every cabinet; drawer swap test documented per IEC 61439-2 to validate free interchangeability without adjustment or rewiring.
Salt spray and thermal cycling test reports referenced to actual batch samples; coating thickness and adhesion measured per ISO 12944 to confirm C5-M environment suitability.
Dielectric withstand, short-time current (50kA), and mechanical endurance (≥20,000 cycles) tested in CNAS-accredited lab; reports traceable to IEC 61439-1/2 and GB/T 7251.
Communication protocol validation for Modbus/IEC 61850; sensor accuracy and response time verified under full-load conditions to ensure reliable data acquisition and control.
|
Product Model |
GCK |
|
Rated Operating Voltage |
400V, 380V |
|
Rated Insulation Voltage |
690V |
|
Main Busbar Rated Current |
4000A~1600A |
|
Main Busbar Rated Short-Time Withstand Current |
80kA |
|
Distribution Busbar Rated Current |
1500A ~400A |
|
Distribution Busbar Rated Short-Time Withstand Current |
50kA |
|
Protection Rating |
IP42, IP41, IP40, IP30 |
|
Frequency |
50Hz |
|
Indoor/Outdoor Type |
Indoor |
Fixed, compartmentalized, or drawer-type layouts with breaker, contactor, VFD, soft-starter, or PFC modules; all pre-validated for mechanical interlock and secondary connector compatibility.
Standard 630–6300A main bus, 50kA breaking; custom ratings available based on verified type-test data for unique load profiles.
Nano-ceramic + German paint for C5-M/CX zones; anti-condensation heaters and IP23D ventilation for humid/tropical sites; low-temperature lubricants for -40°C operation.
Embedded sensors for busbar temperature, drawer position, power quality, and energy consumption; Modbus/IEC 61850 communication; optional motorized drawer mechanisms for remote racking.
RAL color matching, bilingual labels, QR-coded digital manuals; custom compartment layouts for special metering, automation, or auxiliary power requirements.
Dedicated drawer handling tools included; spare parts kits tailored to component brand; extended warranty packages backed by 80+ country service network.
Optional electrical interlocks for remote operation verification; arc-flash detection systems with <10ms trip response; enhanced mechanical locks for high-security facilities.
Tell us your project requirements—voltage level, environment, grid code, or delivery timeline—and we’ll provide a compliant, optimized solution.
EN