Hermetic stainless steel tank with 10,000-cycle endurance for maintenance-free, climate-compliant urban switching.
Non-SF₆ insulating medium eliminates greenhouse gas liability and future regulatory retrofit costs; fully aligned with EU F-Gas Regulation and global decarbonization standards for sustainable grid infrastructure.
3mm 304 stainless steel tank with robotic welding ensures lifetime gas tightness and IP67 internal protection; no gaskets or seals to degrade, guaranteeing maintenance-free operation in coastal, industrial, or high-humidity environments.
Compact dimensions enable direct replacement of legacy SF₆ RMUs without civil modification; standardized interfaces support seamless integration into existing box-type substations and urban retrofit projects.
Fully automated assembly lines eliminate human variability in welding and gas filling; 100% factory leak testing and dielectric validation ensure every unit meets IEC 62271-200 type-test performance benchmarks.
Load switch rated for 5,000 mechanical cycles and vacuum circuit breaker for 10,000 cycles withstand frequent operations in renewable intermittency and smart grid reclosing scenarios; validated under full-load conditions per IEC 62271-103/100.
100% helium leak testing on welded tanks confirms <0.1%/year leakage rate; power-frequency and lightning impulse withstand tested per IEC 62271-200 to validate insulation coordination with eco-gas medium.
Load switch and VCB cycle tests documented under rated load and fault conditions; operating torque and contact resistance measured at intervals to confirm 5,000/10,000-cycle lifespan claims.
IP67 ingress protection and salt spray testing on tank welds and cable terminations verify performance in C5-M/CX environments; thermal cycling validates material compatibility across -40°C to +70°C range.
Optional sensor and communication module interface tested for Modbus/IEC 61850 compatibility; signal integrity verified under EMI conditions typical of automated substations.
|
Parameters |
|
|
|
Rated voltage |
kV |
12 |
|
Rated frequency |
Hz |
50 |
|
Rated current |
A |
Unit C：Unit 630 F：125V unit：630/1250 |
|
Rated power frequency withstand voltage |
kV |
42/48 (Isolation fracture) |
|
Rated lightning impulse withstand voltage |
kV |
75/85 (Isolation fracture) |
|
Mechanical life |
frequency |
Unit C：Unit 5000 F：5000V unit：10000 |
|
Rated short-circuit breaking current |
kA |
Unit F：Unit 31.5V：20/25 |
|
Rated making current |
kA |
Unit C：Unit 50 F：80V unit：50/63 |
|
Main circuit rated short-time withstand current (4s) |
kA |
20/25 |
|
Main circuit rated peak withstand current |
kA |
50/63kA |
|
Internal arc level |
|
AFLR,20kA,0.5s |
|
Rated working pressure (gauge pressure at 20℃) |
MPa |
0.03 |
|
Minimum working pressure (gauge pressure at 20℃) |
MPa |
0.02 |
|
Enclosure protection grade |
|
IP4X |
|
Air box protection level |
|
IP67 |
|
Switch protection level |
|
IP54 |
|
Collision resistance level of switchgear |
|
IK10 |
|
Annual gas leakage rate |
|
≤0.01% |
Load switch, circuit breaker, combination fuse, or metering modules pre-configured within sealed tank; all validated for eco-gas dielectric performance and mechanical interlock coordination.
Standard 630A/20kA; custom ratings available based on verified type-test data for unique network requirements and fault levels.
Enhanced anti-condensation heating for tropical/humid sites; UV-resistant external coatings for direct outdoor exposure; low-temperature mechanism lubricants for arctic operation.
Embedded temperature, pressure, and position sensors; wireless or wired communication options; partial discharge detection for predictive asset management.
RAL color matching for architectural integration; bilingual labels and QR-coded digital manuals; custom cable termination arrangements for retrofit compatibility.
Lifetime sealed-tank warranty; spare mechanism kits for field-replaceable components; extended service packages backed by 80+ country technical support network.
Mechanical/electrical interlocks for earthing switch verification; arc-flash mitigation accessories; enhanced padlock provisions for LOTO compliance in multi-operator environments.
Tell us your project requirements—voltage level, environment, grid code, or delivery timeline—and we’ll provide a compliant, optimized solution.
EN