±0.1mm robotic assembly and 316L nano-ceramic enclosure ensure 50kA withstand and maintenance-free reliability.
±0.1mm tolerance via industrial robots ensures ≥99.5% dimensional accuracy and ≥99% part standardization, eliminating field fit-up issues and guaranteeing seamless trolley interchangeability across the entire installation.
316L stainless steel base with nano-ceramic coating passes 3,000h salt spray and 200 thermal cycle tests; German electrostatic water-based paint achieves ≤5μm uniformity and 0.3% defect rate, ensuring zero-maintenance appearance in coastal, chemical, or extreme-temperature sites.
Supports domestic ZN63A/ZN85 and international ABB VD4/Siemens 3AV3/Schneider HVX without cabinet modification, enabling lifecycle cost optimization and supply chain flexibility while maintaining full type-test validity.
Independent pressure relief ducts per compartment, mechanical/electrical "five-prevention" interlocks, and IP4X/IP2X protection even with door open; all validated through 72h full-load temperature rise and ≥20,000 mechanical life tests per IEC 62271.
Breaker racking, grounding switch operation, and status indication performed with HV compartment sealed, eliminating arc-flash exposure risk during routine switching and testing procedures.
Laser scanning confirms ±0.1mm assembly tolerance on every cabinet; trolley swap test documented per IEC 62271-200 to validate free interchangeability without adjustment.
Salt spray and thermal cycling test reports referenced to actual batch samples; coating thickness and adhesion measured per ISO 12944 to confirm 30-year C5-M environment suitability.
72h full-load temperature rise, 50kA short-time withstand, and 20,000-cycle mechanical endurance tested in CNAS-accredited lab; reports traceable to IEC 62271-1/200 and GB/T 3906.
Interface compatibility verified for each supported breaker model; interlock timing and clearance measurements documented to ensure safe operation regardless of selected interrupter.
|
No. |
Item |
Unit |
Data |
||
|
1 |
Rated voltage |
kV |
3.6, 7.2, 12 |
||
|
2 |
Rated frequency of circuit breaker |
Hz |
50 |
||
|
3 |
Rated current of circuit breaker |
A |
630, 1250, 1600, 2000, 2500, 3150, 4000 |
||
|
4 |
Rated current of switchgear |
A |
630, 1250, 1600, 2000, 2500, 3150, 4000 |
||
|
5 |
Rated short-time withstand current (4s) |
kA |
16, 20, 25, 31.5, 40, 50 |
||
|
6 |
Rated withstands current (peak) |
kA |
40, 50, 63, 80, 100, 25 |
||
|
7 |
Rated short-circuit breaking current |
kA |
16, 20, 25, 31.5, 40, 50 |
||
|
8 |
Rated short-circuit closing current (peak) |
kA |
40, 50, 63, 80, 100, 25 |
||
|
9 |
Rated insulation level |
1 min power frequency withstands voltage |
between poles, pole to earth |
kV |
24, 32, 42 |
|
between open contacts |
kV |
24, 32, 48 |
|||
|
Lightening impulse withstands voltage (peak) |
between poles, pole to earth |
kV |
40, 60, 75 |
||
|
between open contacts |
kV |
46, 70, 85 |
|||
|
10 |
Protection level |
|
Shell: IP4X; IP2X when the CPT and CB doors are open |
||
ZN63A (VS1) for cost efficiency, or ABB VD4/Siemens 3AV3/Schneider HVX for global specs; all pre-validated for trolley interface and interlock coordination without cabinet modification.
Standard 630–4000A main bus, 2500A transfer current, 31.5/50kA breaking; custom ratings available based on verified type-test data to match exact system requirements.
Nano-ceramic + German paint for C5-M/CX zones; anti-condensation heaters and IP23D ventilation for humid/tropical sites; low-temperature lubricants for -40°C operation.
Embedded sensors for temperature, humidity, and partial discharge; Modbus/IEC 61850 communication; optional motorized racking and remote position indication for unmanned substations.
RAL color matching, bilingual labels, QR-coded digital manuals; custom compartment layouts for special relay, metering, or arc-flash protection requirements.
Dedicated trolley transport vehicle included; spare parts kits tailored to breaker brand; extended warranty packages backed by 80+ country service network.
Optional electrical interlocks for remote operation verification; arc-flash detection systems with <10ms trip response; enhanced mechanical locks for high-security facilities.
Tell us your project requirements—voltage level, environment, grid code, or delivery timeline—and we’ll provide a compliant, optimized solution.
EN